feat(nvim): updated config to use vim.pack instead of lazy

2026-04-16 19:42:48 -04:00
parent 086c3ee5a3
commit c07bd3924b
77 changed files with 3511 additions and 169 deletions
@@ -0,0 +1,234 @@
+vim.keymap.set({'n'}, '<leader>gn', '<cmd>Neogit kind=auto<cr>', { desc = 'Neogit' })
+vim.keymap.set({'n'}, '<leader>gN', '<cmd>Neogit kind=floating<cr>', { desc = 'Neogit' })
+vim.keymap.set({'n'}, '<leader>xm', '<cmd>Lazy reload mise.nvim<cr>', { desc = "Reload mise environment"  })
+vim.keymap.set({'n'}, '<leader>kp', '<cmd>PasteImage<cr>', { desc = "Paste image from system clipboard"  })
+vim.keymap.set({ 'n' }, '<leader>uu', vim.cmd.UndotreeToggle, { desc = 'Format buffer' })
+
+require('kulala').setup()
+
+require("just").setup({
+    fidget_message_limit = 32, -- limit for length of fidget progress message
+    open_qf_on_error = true,   -- opens quickfix when task fails
+    open_qf_on_run = true,     -- opens quickfix when running `run` task (`:JustRun`)
+    open_qf_on_any = false;    -- opens quickfix when running any task (overrides other open_qf options)
+    autoscroll_qf = true,      -- automatically scroll quickfix window on output
+    register_commands = true,  -- if set to true then commands (:Just*) will be registered
+    notify = vim.notify,       -- what to use to show messages/errors
+})
+require('img-clip').setup()
+require('sshfs').setup({
+    mounts = {
+        base_dir = vim.fn.expand("$HOME") .. "/Public", -- where remote mounts are created
+    },
+    -- Refer to the configuration section below
+    -- or leave empty for defaults
+})
+require('mise').setup({
+    unset_vars = true,
+    load_on_setup = true,
+    force_run = true,
+})
+
+require('neogit').setup({
+    -- disable_context_highlighting = true,
+    disable_commit_confirmation = true,
+    disable_insert_on_commit = false,
+    disable_signs = true,
+    integrations = { diffview = true, fz_lua = false },
+    auto_refresh = false,
+    console_timeout = 5000,
+    auto_show_console = false,
+    sections = {
+        stashes = {
+            folded = false,
+        },
+        recent = { folded = false },
+    },
+})
+require('zincoxide').setup({
+    zincoxide_cmd = "zoxide",
+    complete = true,
+    behaviour = "tabs",
+})
+
+
+
+vim.keymap.set('n', "<leader>xo", "<cmd>OverseerOpen<CR>", { desc = "Open Overseer"  })
+vim.keymap.set('n', "<leader>to", "<cmd>OverseerToggle<CR>", { desc = "Overseer Toggle"  })
+vim.keymap.set('n', "<F5>", "<cmd>OverseerRun<CR>", { desc = "Run Overseer"  })
+vim.keymap.set('n', "<F6>", "<cmd>OverseerToggle<CR>", { desc = "Overseer Toggle"  })
+
+require("overseer").setup({
+    templates = { "builtin", "user" },
+    component_aliases = {
+        default = {
+            { 'display_duration', detail_level = 2 },
+            'on_output_summarize',
+            'on_exit_set_status',
+            'on_result_diagnostics_quickfix',
+            'on_complete_notify',
+            { "on_complete_dispose", require_view = { "SUCCESS", "FAILURE" } },
+        },
+        default_vscode = {
+            'default',
+            'on_result_diagnostics',
+            'on_result_diagnostics_quickfix',
+            'on_complete_notify',
+        },
+    }
+})
+
+-- local pm = require("overseer.template.vscode.problem_matcher")
+-- pm.register_problem_matcher("$rustc", {
+    --      fileLocation = { "autoDetect", "${cwd}" },
+    --      pattern = {
+        --          --regexp = "^(.*?)-->\\s+(.*?):(\\d+):(\\d+)$",
+        --          -- vim_regexp = "\\v^(.*?)-->\\s+(.*?):(\\d+):(\\d+)$",
+        --          regexp = "^\\s+-->\\s*([^:]*):(\\d+):(\\d+)$",
+        --          vim_regexp = "\\v^\\s+-->\\s*([^:]*):(\\d+):(\\d+)$",
+        --          file = 1,
+        --          line = 2,
+        --          column = 3,
+        --      }
+        -- })
+
+local osys = require("cmake-tools.osys")
+require("cmake-tools").setup {
+    cmake_command = "cmake", -- this is used to specify cmake command path
+    ctest_command = "ctest", -- this is used to specify ctest command path
+    cmake_use_preset = true,
+    cmake_regenerate_on_save = true, -- auto generate when save CMakeLists.txt
+    cmake_generate_options = { "-DCMAKE_EXPORT_COMPILE_COMMANDS=1" }, -- this will be passed when invoke `CMakeGenerate`
+    cmake_build_options = {}, -- this will be passed when invoke `CMakeBuild`
+    -- support macro expansion:
+    --       ${kit}
+    --       ${kitGenerator}
+    --       ${variant:xx}
+    cmake_build_directory = function()
+        if osys.iswin32 then
+            return "out\\${variant:buildType}"
+        end
+        return "out/${variant:buildType}"
+    end, -- this is used to specify generate directory for cmake, allows macro expansion, can be a string or a function returning the string, relative to cwd.
+    cmake_soft_link_compile_commands = true, -- this will automatically make a soft link from compile commands file to project root dir
+    cmake_compile_commands_from_lsp = false, -- this will automatically set compile commands file location using lsp, to use it, please set `cmake_soft_link_compile_commands` to false
+    cmake_kits_path = nil, -- this is used to specify global cmake kits path, see CMakeKits for detailed usage
+    cmake_variants_message = {
+        short = { show = true }, -- whether to show short message
+        long = { show = true, max_length = 40 }, -- whether to show long message
+    },
+    cmake_dap_configuration = { -- debug settings for cmake
+        name = "cpp",
+        type = "codelldb",
+        request = "launch",
+        stopOnEntry = false,
+        runInTerminal = true,
+        console = "integratedTerminal",
+    },
+    cmake_executor = { -- executor to use
+        name = "quickfix", -- name of the executor
+        opts = {}, -- the options the executor will get, possible values depend on the executor type. See `default_opts` for possible values.
+        default_opts = { -- a list of default and possible values for executors
+            quickfix = {
+                show = "always", -- "always", "only_on_error"
+                position = "belowright", -- "vertical", "horizontal", "leftabove", "aboveleft", "rightbelow", "belowright", "topleft", "botright", use `:h vertical` for example to see help on them
+                size = 10,
+                encoding = "utf-8", -- if encoding is not "utf-8", it will be converted to "utf-8" using `vim.fn.iconv`
+                auto_close_when_success = true, -- typically, you can use it with the "always" option; it will auto-close the quickfix buffer if the execution is successful.
+            },
+            toggleterm = {
+                direction = "float", -- 'vertical' | 'horizontal' | 'tab' | 'float'
+                close_on_exit = false, -- whether close the terminal when exit
+                auto_scroll = true, -- whether auto scroll to the bottom
+                singleton = true, -- single instance, autocloses the opened one, if present
+            },
+            overseer = {
+                new_task_opts = {
+                    strategy = {
+                        "toggleterm",
+                        direction = "horizontal",
+                        autos_croll = true,
+                        quit_on_exit = "success"
+                    }
+                }, -- options to pass into the `overseer.new_task` command
+                on_new_task = function(task)
+                    require("overseer").open(
+                        { enter = false, direction = "right" }
+                    )
+                end,   -- a function that gets overseer.Task when it is created, before calling `task:start`
+            },
+            terminal = {
+                name = "Main Terminal",
+                prefix_name = "[CMakeTools]: ", -- This must be included and must be unique, otherwise the terminals will not work. Do not use a simple spacebar " ", or any generic name
+                split_direction = "horizontal", -- "horizontal", "vertical"
+                split_size = 11,
+
+                -- Window handling
+                single_terminal_per_instance = true, -- Single viewport, multiple windows
+                single_terminal_per_tab = true, -- Single viewport per tab
+                keep_terminal_static_location = true, -- Static location of the viewport if avialable
+                auto_resize = true, -- Resize the terminal if it already exists
+
+                -- Running Tasks
+                start_insert = false, -- If you want to enter terminal with :startinsert upon using :CMakeRun
+                focus = false, -- Focus on terminal when cmake task is launched.
+                do_not_add_newline = false, -- Do not hit enter on the command inserted when using :CMakeRun, allowing a chance to review or modify the command before hitting enter.
+            }, -- terminal executor uses the values in cmake_terminal
+        },
+    },
+    cmake_runner = { -- runner to use
+        name = "terminal", -- name of the runner
+        opts = {}, -- the options the runner will get, possible values depend on the runner type. See `default_opts` for possible values.
+        default_opts = { -- a list of default and possible values for runners
+            quickfix = {
+                show = "always", -- "always", "only_on_error"
+                position = "belowright", -- "bottom", "top"
+                size = 10,
+                encoding = "utf-8",
+                auto_close_when_success = true, -- typically, you can use it with the "always" option; it will auto-close the quickfix buffer if the execution is successful.
+            },
+            toggleterm = {
+                direction = "float", -- 'vertical' | 'horizontal' | 'tab' | 'float'
+                close_on_exit = false, -- whether close the terminal when exit
+                auto_scroll = true, -- whether auto scroll to the bottom
+                singleton = true, -- single instance, autocloses the opened one, if present
+            },
+            overseer = {
+                new_task_opts = {
+                    strategy = {
+                        "toggleterm",
+                        direction = "horizontal",
+                        autos_croll = true,
+                        quit_on_exit = "success"
+                    }
+                }, -- options to pass into the `overseer.new_task` command
+                on_new_task = function(task)
+                end,   -- a function that gets overseer.Task when it is created, before calling `task:start`
+            },
+            terminal = {
+                name = "Main Terminal",
+                prefix_name = "[CMakeTools]: ", -- This must be included and must be unique, otherwise the terminals will not work. Do not use a simple spacebar " ", or any generic name
+                split_direction = "horizontal", -- "horizontal", "vertical"
+                split_size = 11,
+
+                -- Window handling
+                single_terminal_per_instance = true, -- Single viewport, multiple windows
+                single_terminal_per_tab = true, -- Single viewport per tab
+                keep_terminal_static_location = true, -- Static location of the viewport if avialable
+                auto_resize = true, -- Resize the terminal if it already exists
+
+                -- Running Tasks
+                start_insert = false, -- If you want to enter terminal with :startinsert upon using :CMakeRun
+                focus = false, -- Focus on terminal when cmake task is launched.
+                do_not_add_newline = false, -- Do not hit enter on the command inserted when using :CMakeRun, allowing a chance to review or modify the command before hitting enter.
+            },
+        },
+    },
+    cmake_notifications = {
+        runner = { enabled = true },
+        executor = { enabled = true },
+        spinner = { "⠋", "⠙", "⠹", "⠸", "⠼", "⠴", "⠦", "⠧", "⠇", "⠏" }, -- icons used for progress display
+        refresh_rate_ms = 100, -- how often to iterate icons
+    },
+    cmake_virtual_text_support = true, -- Show the target related to current file using virtual text (at right corner)
+}